The 1 volume of the product:
Length: 180mm
Width: 40mm
Height: 30mm
2 electrical parameters:
Voltage: DC24-220V
Power: 14.4-140W, power depends on the size of the electricity rate of products, if long time electricity, so power can only be made of 14.4W, if the 10% electricity, so power can be made into 140W.
Current: current depends on the size of power and voltage, current = power / voltage
3 the size of the suction:
The size of the suction are listed in the following table: X40180 suction electromagnet according to the use of different frequency, different power, different suction.
Electricity rate of 10% 25% 50% 75% 100%
Power 140W 100W 70W 35W 14.4W
Suction 250kg 230 kg 200 kg 180 kg 150 kg
4 Effect of distance:
X40180 suction electromagnet and sucked objects at a distance of about, distance farther, then the suction is smaller, the distance is closer, the greater the suction. The role of the farthest distance can be separated by 20mm, the following data are based on 100% electrified rate calculation.
0mm 1mm 5mm 8mm 10mm 12mm distance 15mm 18mm 20mm
150kg 100kg 60kg 40kg 20kg 8kg suction of 5kg 2kg 1kg
The 5 principle:
Product installed on the need to remove iron line, when X40180 sucker electromagnet power, the product surface produces a magnetic field, magnetic objects can be adsorbed, line through the object when the iron magnetic conducting objects, will suck it up, when the full absorption, product power, then the ferrous objects will fall. To remove, iron removal effect.
The 6 part:
Removal of iron by magnetic sucker electromagnet shell, magnetic iron core, coil skeleton, magnetic, waterproof glue etc..
7 product life:
Because the product itself has no mechanical movement, just electricity generating circuit, not as long as the high voltage to cause combustion of waste products, so the product can always use, at the same time itself has a waterproof function, then the product water is not worried, so life is not a problem.
8 product weight:
The product weight about 4kg.
9 matching circuit:
X40180 suction electromagnet to work, then you need to configure the corresponding circuit, first of all, with the circuit, voltage to considering the product, according to the voltage between 24V-220V clients to choose, can choose, also, must want to DC, the market generally has the power supply device is commonly used in switching power supply, power supply device to size more than an electromagnet, or current to determine the size, is the current supply device of load current is greater than the electromagnet.
10 product installation:
Products are on the edge of several mounting hole, 2 on each side, diameter is 5mm, can be used for installing a thread, as shown below:
11 product temperature rise:
The rate of temperature rise and electricity products products, related to power.
Electricity rate refers to the customer of an electromagnet to chuck off than when in use, the electrifying time / (power-off time + conduction time)
The rate of temperature rise of electricity power
10% 140W ambient temperature plus 10 degrees
50% 100W ambient temperature plus 20 degrees
75% 35W ambient temperature plus 25 degrees
100% 14.4W ambient temperature plus 30 degrees
12 product temperature:
Sucker electromagnet temperature has several levels, can according to the customer need to set the level of.
Class A E B F H C
Temperature (c) 105120130155180220
Sucker an electromagnet 13 other different dynamics are listed in the following table:
